HOPPER / FEEDER 2.3m3 (3yd3) Hopper capacity
Two stage ‘Tine’ grizzly feeder as standard
26mm (1″) Nominal spacing

IMPACT CRUSHER 860mm (34″) X 610mm (24″) Crusher inlet
830mm (33″) Wide x860mm (34″) diameter rotor
2 High / 2 low configuration as standard
Max OSS – 120mm (4.75″) upper 55mm (2.25″) lower
Min OSS – 40mm (1.4″) upper 20mm (0.75″) lower
Hydraulic adjust and hydraulic overload protection as standard
Rotor speed: 700-930rpm (32-40m/s tip speed)

OUTPUT POTENTIAL Up to 250 tph / 275 US tph

POWERUNIT Tier 3: CAT C7.1 186kW/250Hp
Tier 4: 202kW/ 275Hp CAT C7.1 engine
Direct drive to crusher via clutch and V belts

CONVEYORS 900mm (36″) Wide product conveyor
Product conveyor discharge height: 3420mm (10’8″)

GENERAL Intuitive colour screen control panel

TRANSPORT Track Unit: L 12.05m (39’6″) W 2.5m (8’2″) H 3.2m (10’6″)

Weight (with Side Conveyor & Magnet) – 27,000Kgs (59,525lbs)
Length 13.4m with non-folding conveyor
Length is 12.05m with optional folding conveyor

– Output potential 250 tph (275 US tph)
– Suitable for a variety of feed materials
– Ideal for recycling & demolition applications
– Replaceable tine bar cartridge style grizzly feeder
– Load management system to control feeder speed
– Proven Terex impact crusher with hydraulic overload protection, 4 bar rotor & twin aprons
– Crusher speed variation through user friendly PLC control system
– Fully independent under crusher vibrating pan feeder (Optional)
– Latest generation power unit that meets EU Stage IV / US Tier 4F emissions legislation
– HPTO clutch & highly fuel efficient direct drive system
– Modular conveyor with raise/lower facility to aid clearance of rebar
– Overband magnet (Optional)